1、 Adhesive ratio: When pasting the roll material, the amount of adhesive added is 5% of the weight of cement, that is, two bags of 100 kg cement and one bag of 0.5 kg adhesive.
2、 Glue preparation method: first dry mix a bag of adhesive with 6-12kg of cement evenly, then add 27.5-32.5kg of water while mixing. After mixing evenly, add the remaining cement, and mix until there is no clot, sediment, or foam.

1. The prepared cement adhesive should be used up within four hours, and water can be added and mixed at any time during use, but the total water content should not exceed 70% of the cement weight.
2. This adhesive is only suitable for pasting multi-layer polymer waterproof rolls.
3. Electric mixers should be used during mixing, and the mixing time should be extended when using manual mixing.