1、Water-based, single component, color adjustable, non-toxic and odorless, easy to apply, environmentally friendly polymer waterproof material.
2、After coating, a seamless rubber and plastic layer with high elongation and high tensile strength is formed, which has a good waterproof effect.
Liquid room temperature construction without joints is particularly advantageous for construction sites with complex shapes and structures that prohibit open flames.
3、High solid content, excellent physical and mechanical properties, good water resistance, weather resistance, and durability, can be used for exposed waterproofing.
4、The best waterproofing and repair effect for toilets, sinks, walls, and repair works.
5、Excellent aging resistance, stable performance under UV, heat, light, and oxidation, and long service life of the material.

1. Roof: Various new and old flat sloping roofs and eaves, especially suitable for waterproofing and anti-seepage in irregularly shaped areas.
2. Ground buildings: Waterproof and moisture-proof finishes for toilets, kitchens, sinks, and exterior walls.
3. Underground buildings: interior and exterior walls, floor panels, underground tunnels, elevator rooms, etc.
4. Composite use with various waterproofing membranes or coatings to improve waterproofing effectiveness and durability· When combined with an SBS waterproof membrane, the waterproof effect can reach more than 25 years.

1. Before construction, the coating should be thoroughly mixed and evenly mixed, and water should not be added arbitrarily except for the base coating to ensure quality.
2. Adding reinforcement materials to the matrix should generally be applied in the second layer of coating.
3. Construction is strictly prohibited under 5 ℃ or in rainy, snowy, or freezing weather. Before the coating dries, no other work should be carried out on the coating to avoid damaging the protective layer and affecting the waterproof effect.
4. To ensure the waterproof effect, it is recommended to use at least 2.5 kilograms per square meter of this coating.
5. Precipitation is normal, stir evenly and use normally.